Publicité
Les langues disponibles
Les langues disponibles
a double beep every 2 seconds. If it is audible, move
onto the next step.
10. Press the Beeper Mode button a third time; you
should hear 3 rapid beeps. This mode will turn off
your beeper and remain silent.
Note 1: The pitch that the beeper will emit will vary
depending on your setting with the (high/low) Pitch
Setting button.
Note 2: In the Run/Point or Point-Only mode, it is still
possible to use electrical stimulation.
32
11. Code Setting Guide
Before coding the transmitter, determine how you would
like to use the transmitter.
1) Use as 1-dog system or 2-dog system
2) Which side, between Front or Left, you want for 'Dog 1'
Please note that if you want to add an expandable second
receiver, you must use the '2-Dog Set Up' instructions.
Left side
Setting Mode
Make sure the transmitter is off. Hold the on/off button
on the transmitter until there is a rapid green LED light
on the transmitter and the OLED screen shows "Setting
Mode
"
The transmitter is now in "Setting Mode." Proceed to
the dog set up you desire.
Front side
33
Publicité
