Dogtra 2700T&B Manuel Du Propriétaire page 8

Receiver On/Off Magnetic Red Dot
To turn on the receiver/collar, place the magnetic red
dot on the back of the transmitter to the red dot on
the receiver/collar. Hold the two red dots together for a
moment until the LED light on the receiver/collar comes
on. The receiver/collar will emit a melody when turned
on.
To turn off the unit, repeat the same procedure holding
the two red dots together momentarily. The LED light
will turn red for a brief moment indicating that the
receiver/collar has now shut off. The receiver/collar will
emit a melody when turned off.
12
2. Transmitter Button Function
2700T&B
Locate
Pager
The transmitter for the 2700T&B has five buttons (two
on the face of the transmitter, two on the left side, and
one on the right side).
Nick Button
When the Nick button is pressed, the receiver emits a
single rapid pulse of electrical stimulation.
Constant Button
Pressing the Constant button gives continuous
stimulation as long as the button is pressed, for up to 12
seconds. If the button is not released after 12 seconds,
the stimulation will automatically turn off as a safety
feature. The receiver will be ready to be reactivated
once the button has been released.
Beeper Pitch
Toggle Switch
Nick
Constant
On/Off
Button &
Mode
Beeper Pitch
Toggle Switch
13