Télécharger Imprimer la page

Dogtra 2700T&B Manuel Du Propriétaire page 10

Publicité

Les langues disponibles

Les langues disponibles

3. BEEPER SOUND
When you press the Mode button the first time, the collar
will beep twice. The beeper unit will always start in Run/
Point mode. The beeper will sound every 7 seconds while
the dog is running, and every 2 seconds when the dog
is on point or becomes stationary. The second time you
push the Mode button, it will beep once and remain silent
while the dog is running and beep every 2 seconds when
the dog is on point or stationary.
To turn the beeper unit off, press the Mode button a third
time. The unit will emit three rapid beeps, and the beeper
will turn off. The Locate mode can still be used!
Initial Beeper
Mode
Sound
Press
Run/Point
2 Beeps
1st Time
Mode
Press
Point-Only
1 Beep
2nd Time
Mode
Press
No Beeper
3 Beeps
3rd Time
Mode
Note : The Locate button can be used in any mode you
are in.
16
Action
- Dog running/moving : emits
double beep every 7 seconds
- Dog stationary/pointing : emits
double beep every 2 seconds
- Dog running/moving : silent
- Dog stationary/pointing : emits
double beep every 2 seconds
No sound
4. BEEPER VOLUME ADJUSTMENT
The beeper volume level for the Run/Point mode and
Point-Only mode can be increased or decreased by
holding the Locate button down and briefly pushing the
Pager button. There are two beeper tones : High (H1 =
lowest volume, H2 = medium volume, and H3 = highest
volume) for the orange collar and Low (L1 = lowest
volume, L2 = medium volume, and L3 = highest volume)
for the green collar. If you want to change the tone of
your collar(s) from High to Low or from Low to High,
email us at Info.canada@dogtra.com or call customer
service at 1 (888) 811-9111.
Toggle Switch
High LCD Displays
Press Pager 1st Time
(While holding down
the Locate button)
Press Pager 2nd Time
(While holding down
the Locate button)
Press Pager 3rd Time
(While holding down
the Locate button)
Note : The Locate beeper volume is not
adjustable; it is always on the highest level, L3 on low
tone, or H3 on high tone.
Toggle Switch
Low LCD Displays
H1
L1
H2
L2
H3
L3
17

Publicité

loading

Ce manuel est également adapté pour:

2702t&b