Dogtra 2700T&B Manuel Du Propriétaire page 12

7. FAMILIARIZING THE DOG TO THE BEEPER
Turn the beeper collar on and leave it outside the dog's
kennel area for about 30 minutes. Repeat this several
times until you can see that the dog disregards the
beeper. Next, adjust the beeper volume level to level
L1 or H1, the lowest level. Fit the beeper collar on the
dog and select the desired beeper volume level as the
dog becomes accustomed to the beeping sound.
8. MAXIMIZING THE DISTANCE
The 2700T&B Series collar has a maximum range of 1600
metres. Depending on where you are and the way you
use your transmitter, the transmitter range may vary.
To get the greatest range, hold the transmitter away
from your body and avoid touching the antenna. Keep
your unit properly charged for maximum signal strength.
Maximum Typical range
20
Minimum range
9. LED INDICATOR
The LED indicator flashes every 4 seconds when the
receiver is on and ready for use. The LED indicator will
blink on both the transmitter and the receiver when the
transmitter buttons are pressed.
The LED indicator color indicates the battery life level.
Green = Full charge
Amber = Medium charge
Red = Needs charge
If the unit is used while the LED indicator is red, it may
shut down automatically.
Receiver Indicator Light
When the Constant button on the transmitter is pushed,
the collar indicator light will glow steadily (either green,
amber, or red based on the remaining battery life), as
long as you hold the button down, for up to 12 seconds.
When the Nick button is pushed, the light comes on for
a fraction of a second.
21