Dogtra 2700T&B Manuel Du Propriétaire page 13

10. BATTERY CHARGER
The battery charger and charging cables allow you to
charge both the transmitter and receiver at the same
time. The battery charger is designed for a 120 volt wall
outlet (Also available : 10 volt car chargers for lithium
polymer batteries).
To use the battery charger for the two-dog unit,
combine both sets of charging splitter cables as shown.
This enables you to charge the transmitter and both
receivers at the same time.
Note : Only use Dogtra-approved lithium polymer
battery chargers for your Dogtra e-collar. This will
prevent any damage that can be incurred from
attempting to use a different charger.
22
11. CHARGING THE BATTERY
The 2700T&B Series uses lithium polymer batteries.
1. Charge the unit before using the unit for the first time.
2. Do not charge the batteries near any flammable
substances.
3. Fully charge the batteries if the unit is to be stored
without use for a period of 3 months or more.
Recharge the Unit If :
• The LED indicator light on the receiver/collar is
emitting a red color.
• If the 3 bar indicator on the transmitter LCD shows just
1 bar.
• The indicator light on the transmitter or receiver will
not come on.
• The indicator light on the transmitter or receiver comes
on momentarily, but will not stay on when the Constant
button is pushed.
23