Table Des Matières; Specifications; Safety Notes - ANSMANN Racing xBase 2.0 SE Mode D'emploi

Intelligent Digital Balance Charger
xBase 2.0 SE
Instruction Manual
Content
1. Specifications ...................................................2
2. Safety Notes ....................................................2
3. The Charger Does Support the Following
Battery Types ...................................................3
4. Exterior View ...................................................3
5. Key Features ....................................................3
6. Configuration Menu ...........................................4
7. LiPo/LiIon/LiFe Program ....................................4
8. Balance Socket Connection Diagram .......................5
9. NiMH, NiCd Battery Program ...............................5
10. PB Battery Program ...........................................5
11. Warning and Error Messages ................................6
12. Guarantee .......................................................7
You need to keep this manual in a safe place, and be sure to pass it
on to the new owner if you ever dispose of xBase 2.0 SE.
2
We reserve the right to commit modifications. Copyright reserved.

1. Specifications

Input voltage range DC 11.0 ~ 18.0 V
Charge current 0.1 ~ 3.0 A
Charge power max. 35 W
Balance current < 300 mA
Balance tolerance < 10 mV
Lithium battery type LiPo/LiIon/LiFe
Lithium battery cell count 1 - 4 cells
NiCd/NiMH battery cell count 1 - 10 cells
PB battery voltage 2 ~ 12 V (1 - 6 cells)
Weight 175 g
Dimensions (l x w x d) 116 x 75 x 25 mm

2. Safety Notes

Please follow below safety notes otherwise the charger and the
battery can be damaged violently.
• Do not keep it in an environment below 5°C or above 50°C.
• Keep away the charger from dust, damp, rain, heat, direct
sunshine and vibration. Do not drop it.
• This charger should be used on a heatresistant, nonflammable
and nonconductive surface. Never place it on a car seat, carpet
or similar.
• Do not apply the voltage & current higher than the
requirements by the manufacturer of the battery.
• Double check if the battery count and type match your charger
settings.
• Never disassemble or alter the charger.
• Do not attempt to charge/discharge nonrechargeable batteries
or damaged batteries with the charger.
• Keep the charger far away from children. Never leave the
charger unsupervised, when it is connected to its power
supply.
Instruction Manual