Publicité
11
Install levers.
11a To install interior lever, loosen set screw in lever using included
hex wrench.
11b Push lever onto spindle.
BAG 6
11c Loosen set screw in exterior lever using included hex wrench.
11d Ensure lever catch is recessed.
11e Push lever onto spindle.
BAG 6
11f Tighten the set screws
Hand tighten only. Do not overtighten the set screws. This will
cause permanent damage and prevent tightening.
Repeated lever removal may lead to failure of the set screws.
Tighten set screws until they are recessed to prevent levers
from being pulled off during operation.
Complete Testing (pg 6) now, before installing
L
covers.
1 ~15 in-lb (2 Nm)
Pull spindle
out to allow
lever catch
to fall down.
on the levers until they are recessed.
1
NOTICE
Tighten set
screws until
they are
recessed.
CAUTION
12
Install covers.
12a Slide covers on.
12b Secure with screws.
BAG 5
Actual size
(black)
Screw
retained in
cover.
See
for security screws.
BAG 5
L
1
5
Publicité
