Publicité
5
Assemble posts onto interior plate.
If Condensation Sealant Kit is required, it should be
L
installed before this step. See the instructions that came
with the kit, or contact customer service, for more
information.
Use hole pair that matches handing.
BAG 2
LH/LHR
6
Install interior spindle.
Wide end
toward interior.
7
Install interior plate.
7a Route DPS wire through gasket as shown.
7b Route spindle through hole in plate.
7c Push the plate against the door.
7d Secure with two (2) screws.
BAG 2
Hold posts
with pliers.
RH/RHR
BAG 3
Actual size
8
Install exterior assembly.
8a Install spindle into assembly.
8b Route cables and posts though holes as shown. Push
assembly against door and hold.
8c Route cables through gasket on interior plate. Install three (3)
screws.
BAG 4
Carefully pull cables
through gasket.
Actual size
9
Install interior assembly.
If Condensation Sealant Kit is required, install now. See
L
the instructions that came with the kit, or contact
customer service, for more information.
3
Publicité
