Publicité
Les langues disponibles
Les langues disponibles
Timer
The timer is able to be used simultaneously with both heating zones and with different time
settings (from 0 to 99 minutes) for each heating zone.
•
Setting and modification of the cooking time:
Action
Zone selection
Increase power
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops blinking.
The time is confirmed and the cooking starts until the time reaches [ 00 ].
•
To stop the cooking time:
Action
Zone selection
To select « Timer »
To stop the « Timer »
If several timers are activated repeat the process.
•
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking press any key.
•
Egg timer function:
Action
Activate the hob
Select« Timer »
Decrease the time
Increase the time
After a few seconds the control light stops blinking.
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking press any key.
Control panel locking
To avoid modifying a setting of cooking zones when cleaning, the control panel can be locked
(excluding the On/Off key [
•
Locking:
Action
Start
Hob locking
•
Unlocking:
Action
Start
In the 5 seconds after start:
Unlocking the hob
Control panel
Press selection key from the zone
Press key [ + ]
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Press key [ + ]
Control panel
Press selection key from the zone
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Control panel
Press key [
]
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Press key [ + ]
]).
Control panel
Press key [
]
Press simultaneously [ - ] and
selection key from the front zone
Repress selection key from the
front zone
Control panel
Press key [
]
Press simultaneously [ - ] and
selection key from the front zone
Repress key [ - ]
32
Display
[ 0 ]
[ 1 ] ... [ 9 ] [ P ]
[ 00 ]
[ 00 ] went to 30,29....
time increase
Display
[ 0 ]
The remaining time
[ 00 ] then stops
Display
[ 0 ] or [ H ]
[ 00 ]
[ 00 ] went to 30,29....
time increase
Display
[ 0 ] or [ H ]
[ 0 ] or [ H ]
2 x [ L ]
Display
2 x [ L ]
2 x [ L ]
No light on the displays
Publicité
