ENVIRONMENT
• Dispose of packaging material such as plastic and cardboard boxes in
the designated containers.
• Do not dispose of this product as normal domestic waste at the end of
its life, but hand it in at a collection point for the reuse of electric and
electronic equipment. Look for the symbol on the product, the user
instructions or the packaging showing the type of waste.
• The materials can be used as indicated. By helping us reuse and process
the materials or otherwise recycle the old equipment, you will be making
an important contribution towards the protection of the environment.
• Your municipality can tell you where to find the designated waste
collection point in your neighbourhood.
SERVICE
In the unlikely event of a malfunction, please contact Bestron customer
service: www.bestron.com/service
OPERATION - General information
The below description goes with the image on page 2.
1. Housing
2. Baking plates
3. "Heating" pilot light
4. "At temperature" pilot light
5. Non-slip feet
6. Safety lock clip
7. Removing fork
8. Cooling- and decorating-tray
9. Sticks
OPERATION - Using for the first time
1. Remove the packaging.
2. Clean the baking plates to remove any residues that may be left from the manufacturing process (see
"Cleaning and maintenance"). Dry them thoroughly.
3. Put the plug into the wall socket and allow the cake-popmaker to heat up. This will take about 10
minutes; allowing it to heat will remove any packaging odour from the appliance.
ATTENTION:
•
The appliance may emit a little smoke and a characteristic smell when you switch it on for the first
time. This is normal, and will soon stop. Make sure the appliance has sufficient ventilation.
•
Keep house birds away from the appliance when it is in use. Fumes released from the non-stick
coating when the baking plates are hot may be harmful to birds.
15
15
EN
EN