Publicité
Les langues disponibles
Les langues disponibles
4 BEFORE USING THE
APPLIANCE
4.1 Preparing Your Dishwasher For First
Use
• Make sure the electricity and supply
indicated in the installation instructions
for the machine.
• Remove all packaging material inside the
machine.
• Set the water softener level.
• Fill the rinse aid compartment..
4.2 Salt Usage (IF AVAILABLE)
For a good washing function, the
dishwasher needs soft, i.e. less calcareous
water. Otherwise, White lime residues
will remain on the dishes and the interior
machine's washing, drying and shining
the softener system, the ions forming the
hardness are removed from the water and
the water reaches the softness required to
obtain the best washing result. Depending
water, these ions that harden the water
accumulate rapidly inside the softener
system. Therefore, the softener system
has to be refreshed so that it operates with
the same performance also during the next
wash. For this purpose, dishwasher salt is
used.
Machine can only be used by special
dishwasher salt to soften the water. Do not
use any small grained or powdered type
of salts which can easily soluble. Using
any other type of salt can damage your
machine.
4.3 Fill The Salt (IF AVAILABLE)
To add softener salt, open the salt
compartment cap by turning it counter
clockwise. (1) (2)
compartment with 1 kg salt and water (3)
using a funnel (4)
Replace the cap and close it. After every
20-30 Cycles add salt into your machine
1
3
Only add water to the salt compartment
use in dishwashers.
When you start your dishwasher, the salt
put the softener salt in prior to starting your
machine.
do not start the machine immediately, run
a short washing program to protect your
machine against corrosion.
EN - 12
2
4
Publicité
