Publicité
Les langues disponibles
Les langues disponibles
FAULT
Whitish stains remains
on dishes.
Dishes do not dry.
Rust stains form on the
dishes.
Detergent remains in the
detergent compartment.
POSSIBLE CAUSE
Not enough detergent used.
softener setting set too low.
High water hardness level.
Salt compartment cap not closed
properly.
Drying option is not selected.
Rinse aid dosage set too low.
Stainless-steel quality of the dishes
High level of salt in wash water.
Salt compartment cap not closed
properly.
Too much salt spilled in the
A poor mains grounding.
Detergent was added when the
detergent compartment was wet.
EN - 26
TROUBLESHOOTING
Use the correct amount of detergent, as
instructed in the programme table.
level.
Increase water softerner level and add salt.
Check that the salt compartment cap is
closed properly.
Select a programme with a drying option.
Increase rinse aid dosage setting.
Use only dishwasher-proof sets.
Adjust the water hardness level using water
hardness table.
Check that the salt compartment cap is
closed properly.
compartment to avoid spillage.
Make sure detergent compartment is dry
before use.
Publicité
