Publicité
Les langues disponibles
Les langues disponibles
2.6 Fitting The Machine Undercounter
space to do so and the wiring-plumbing
must be suitable to do so (1). If the space
your machine, remove the worktop as
shown in the illustration (2).
WARNING: The countertop, which
the machine will be placed under, must be
stable in order to prevent imbalance.
The top panel of the dishwasher must
countertop.
To remove the top panel, remove the
screws that hold it on, located at the rear
of the machine. Then, push the panel 1 cm
from the front towards the rear and lift it.
Adjust the machine feet according to the
3).
Fit your machine by pushing it under the
counter taking care not to crush or bend the
hoses (4).
WARNING: After removing the top
panel of your dishwasher, the machine
should be placed in a space of the
60 cm
(±2 mm)
A: If there is no felt on the top of the
product; you should take into account this
product's height.
B1: If there is felt on the top of the product
with 2nd basket; you should take into
account this product's height.
B2: If there is felt on the top of the product
with 3rd basket; you should take into
account this product's height.
EN - 9
A
B
All
B
Products
1
820 mm
830 mm
835 mm
B
2
Publicité
