Publicité
Les langues disponibles
Les langues disponibles
EN
Troubleshooting
Problem
Possible Cause
Solution
Pressure incorrect
Set the correct air pressure according to the specification
Dirt within the mechanism
Repeat the 'Daily maintenance procedure' several times to clear the dirt
Tool stops working or only works
Check all fittings and hose for air leaks and correct issue by re-tightening,
intermittently
Air leak
using PTFE tape or replacing
Blockage in gauze mesh filter
Remove Quick Connector (8) and clean mesh filter
If the above troubleshooting solutions fail, contact your dealer or an authorised Silverline service centre.
12
Publicité
