Publicité
Les langues disponibles
Les langues disponibles
Requirement: The appliance is
switched on.
Press and hold
1.
buttons simultaneously for at least
3 seconds.
Press
button
2.
display shows "W. hardness".
Confirm with "ok" button
3.
Press
button
4.
display shows "Water filter".
Confirm with "ok" button
5.
a The display shows "Filter act.".
Immerse the water filter in a glass of
6.
water with the opening facing up
and press the sides together lightly
until no more air bubbles rise to the
surface.
→ "Water filter", Page 16
and
until the
.
until the
.
Before using for the first time en-us
Set the water hardness on the
7.
aroma ring of the water filter.
Press the water filter firmly into
‒
the empty water tank.
You can find out the water hardness
from your local water supplier.
Fill the water tank with water up to
8.
the max mark.
Insert the water tank in the
9.
appliance.
Place a container with a capacity of
10.
at least 33.8 oz. (1 l) under the
outlet.
Press "ok" button
11.
store the setting and start rinsing.
a Water now flows through the filter.
To exit the menu, press "<" button
12.
.
Empty the container.
13.
a The appliance is ready for
operation.
Removing the water filter
You can also operate your appliance
without a water filter.
Remove the water filter.
1.
Set the water hardness.
2.
Tips
¡ You should also change your water
filter for sanitation reasons.
to
17
Publicité
