Publicité
Les langues disponibles
Les langues disponibles
Issue
Display shows "Close
door" despite the door
being closed.
Display shows "Empty
trays" despite the drip
tray being empty.
Display shows "Fill wa-
ter tank" and LEDs
flashing.
Display shows "Device
too cold".
Display shows "Restart
appliance".
LEDs flashing.
Display shows "Restart
appliance".
No LED is lit up.
Display shows "Clean/
fill water tank"; and
and
lit up.
Cause and troubleshooting
Door is not closed properly.
Press the door firmly shut.
▶
Appliance is too hot.
Disconnect the appliance from the power supply.
1.
Wait 1 hour so the appliance can cool down.
2.
Appliance is switched off and does not detect emptying.
Switch the appliance on and remove the drip tray.
1.
Reinsert the drip tray.
2.
Water tank is missing or wrongly inserted.
Insert the water tank correctly.
▶
Pipe system in the appliance is dry.
Fill the water tank with fresh, cold, non-carbonated
▶
drinking water.
Air in the water filter.
Immerse the water filter in water with the opening
1.
facing upwards until no more air bubbles escape.
Reinsert the filter.
2.
Ambient temperature is too cold.
Operate the appliance at temperatures over 41 °F
▶
(5 °C).
Brewing unit is heavily soiled or cannot be removed.
Restart the appliance.
▶
Clean the brewing unit.
▶
Appliance has an error.
Restart the appliance.
▶
Descaling process was interrupted.
Proceed as described in section
▶
→ "Resetting a service program", Page 30 .
are
Troubleshooting en-us
35
Publicité
