Husqvarna BGS 250 Manuel D'utilisation page 15

2. Adjust the handlebar to upright position.
3. Tilt the product rearward and fold down the
handlebar until the handle is on the floor.
CAUTION:
power cord and the dust extractor hose
do not become damaged when you tilt
the product.
CAUTION:
thin wood below the handle to prevent
damage to the floor.
2363 - 003 - 22.05.2024
Make sure that the
Put a piece of cloth or
4. Put the special tool through the slots to prevent
movement of the tool plate.
5. Remove dust with the dust extractor.
6. Remove the tool plate (A).
7. Examine the grind holder for damages and examine
the wear of the rubber flexible coupling.
8. Replace the rubber flexible coupling if it is damaged
or does not operate correctly.
To do a check of the grinding head cover
• Examine the grinding head cover for damages.
• Make sure the grinding head cover can move up and
down freely.
CAUTION:
cover does not move freely, the dust
collection can become unsatisfactory
during operation.
• If the grinding head cover does not operate correctly,
speak to your Husqvarna service agent
A
If the grinding head
15