Publicité
Les langues disponibles
Les langues disponibles
PRESET REMOTE CONTROL
Returning to the Factory Setting
I To return to the factory-set codes
in all modes
1
Press one of the
component selector
buttons other than
AMP(TUNER).
2
Press both VOLUME
buttons (u/d) at the same
time for about four
seconds.
The indicator flashes twice.
3
Enter the code number
"9990".
Make sure that the indicator
flashes twice.
The following codes are factory set.
Component selector button
TV
CBL/SAT
VCR
DVD/LD
CD
TAPE/MD
We recommend that you write all the code numbers you have set on the table above.
46
Component
Code
TV
0101
Cable TV
0006
VCR
0002
DVD player
0008 (YAMAHA DVD player)
CD player
0005 (YAMAHA CD player)
MD recorder
0024 (YAMAHA MD recorder)
I To return to the factory-set codes
in each mode
1
Press one of the
component selector
buttons which
corresponds to the
component to be returned
to the factory-set code.
2
Press both VOLUME
buttons (u/d) at the same
time for about four
seconds.
The indicator flashes twice.
3
Enter the code number
"0000".
Make sure that the indicator
flashes twice.
Set component
Set code
Publicité
