Publicité
Les langues disponibles
Les langues disponibles
Specific failure and solution
Failure
The LED does not
come on when the
hob is plugged in.
Some buttons
don't work, or the
LED display is not
working normally.
The cooking mode
indicator comes on,
but heating does
not start.
Heating suddenly
stops during
operation and the
symbol
on the display.
IH2350M_OP 25oct 1.indd 85
IH2350M_OP 25oct 1.indd 85
Problem
No power supplied.
The
accessorial
board and the display board
connected failure.
The accessorial power board
is damaged.
The
display
damaged.
High temperature of the hob.
There is something wrong
with the fan.
The power board is damaged. Replace the power board.
Pan type is incorrect.
Pot diameter is too small.
flashes
The hob is overheated.
Check to see if plug is secured
tightly in outlet and that outlet is
working.
power
Check the connection.
Replace
the
board.
board
is
Replace the display board.
Ambient temperature may be too
high. Air intake or air vent may be
blocked.
Check
whether
smoothly. If not, replace the fan.
Use a correct pan (refer to 'Pan').
The hob is overheated. Wait for
temperature to return to normal.
Touch
to restart the hob.
Pan detection circuit is damaged,
replace the power board.
Solution
accessorial
power
the
fan
runs
85
26/10/2023 10:54 AM
26/10/2023 10:54 AM
Publicité
