Publicité
Les langues disponibles
Les langues disponibles
A (mm)
760
WARNING: Ensuring Adequate Ventilation
Make sure the hob is well ventilated and the air inlet and outlet are
not blocked.
To prevent items accidently touching the base of the hob, it is
necessary to put a wooden insert, fixed by screws, at a minimum
distance of 50mm from the bottom of the hob. Follow the
requirements below.
There are ventilation holes around outside of the hob. YOU
MUST ensure these holes are not blocked by the worktop when you
put the hob into position.
Make sure that the glue that joins the plastic or wooden
material to the cabinet is able to resist temperatures up to 150°C.
The rear wall, adjacent and surrounding surfaces must be able to
withstand a temperature of 90°C.
Installing the brackets
Fix the hob to the worktop using 4 brackets on the base of the hob.
IH2350M_OP 25oct 1.indd 69
IH2350M_OP 25oct 1.indd 69
B (mm)
C (mm)
Min. 50
Min. 20
Max. 5mm
D
Air intake
Min. 50mm
Max. 5mm
E
Air exit 5mm
69
26/10/2023 10:54 AM
26/10/2023 10:54 AM
Publicité
