Publicité
Les langues disponibles
Les langues disponibles
Timer
The timer can be used to set a cooking zone to switch off automatically.
You can set the timer up to 99 minutes.
1. Rotate the corresponding knob that you want to set the timer for.
2. Touch
3. When the time is set, it will begin to count down immediately.
•
The display will show the remaining time and the timer indicator will
flash for about 5 seconds.
•
NOTE: The red dot next to power level indicator will illuminate,
indicating that the zone is selected.
4. When the set time elapses, the corresponding cooking zone will switch off
automatically.
To cancel the timer
Rotate the corresponding knob until the display shows "00", indicating that
the timer is cancelled.
IH2350M_OP 25oct 1.indd 77
IH2350M_OP 25oct 1.indd 77
The letter "H" will appear on the display of the cooking
zone which is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can
also be used as an energy saving function if you want
to heat further pans on the cooking zone that is still hot.
and then rotate the knob to set the time.
Rotate the knob once to decrease or increase by 1
minute.
77
26/10/2023 10:54 AM
26/10/2023 10:54 AM
Publicité
