Publicité
Les langues disponibles
Les langues disponibles
Using the Control Panel
•
The buttons are touch-sensitive, so you do not need to apply any pressure.
•
Use the ball of your finger, not its tip.
•
You will hear a beep each time a touch is registered.
•
Make sure the buttons are always clean, dry, and that there is no object (e.g.
a utensil or a cloth) covering them.
To start cooking
Put the food into a cookware and position it on the
centre of the circular design on the plate.
NOTE:
•
A lid must be used when cooking.
•
Never place empty cookware on the appliance, when the appliance is
switched on.
•
Make sure the bottom of the pan and the surface of the cooking zone are
clean and dry.
1. Touch and hold
•
A beep will sound and all displays will show "—" or " — — ", indicating that
the induction hob has entered the standby state.
2. Rotate the corresponding knob, and the indicator next to the knob will flash.
3. Select a power level (1 to 9) by rotating knob control.
•
If you do not choose a heat setting within 1 minute, the induction hob
will automatically switch off.
•
You can modify the power level at any time during cooking.
If the display
IH2350M_OP 25oct 1.indd 75
IH2350M_OP 25oct 1.indd 75
for 2 seconds.
flashes, you may encounter one of the following situations:
75
26/10/2023 10:54 AM
26/10/2023 10:54 AM
Publicité
