Intended Use; Caractéristiques Techniques - VOLTCRAFT UFC-3 Notice D'emploi

Introduction
Dear Customer,
In purchasing this Voltcraft® product, you have made a very
good decision for which we should like to thank you.
You have acquired an above-average quality product from a brand
family which has distinguished itself in the field of measuring, charg-
ing and network technology by particular competence and perma-
nent innovation.
Whether you're an ambitious hobbyist or professional user, Volt-
craft® can help you tackle even some of the most difficult tasks you
may encounter. Voltcraft® offers you reliable technology at an
extraordinarily favourable cost-performance ratio.
We are confident your investment in a Voltcraft product will at the
same time be the start
of a long and profitable co-operation.
We wish you much enjoyment with your new Voltcraft® product!
The plug-in quick charger UFC-3 has been constructed according
to the state-of-the-art. This product meets the requirements of all
applicable European and national guidelines. Its conformity has
been certified. The corresponding declarations and documents are
held by the manufacturer.
To maintain this status and to ensure risk-free operation, the user
must observe the following operating instructions.

Intended use

The intended use of the device comprises the charging of 1 to 4 re-
chargeable NiCd/NiMH accumulators of the sizes Mignon (AA) and
Micro (AAA). The single shaft monitor lets you charge different accu-
mulators (different size, capacity or charge status) at the same time.
You may only use a 100 to 240V(50/60 Hz) wall outlet or a 12V car
outlet for power supply. Operation and storage are permitted only in
dry and closed rooms. Avoid contact with moisture.
10
Caractéristiques techniques
Alimentation électrique : Tension alternative de 100 à 240 V
Courant de charge : 2 x Mignon 1050 mA
: 4 x Mignon 550 mA
: 2 x Micro 500 mA
: 4 x Micro 260 mA
Courant de décharge : Mignon 170 mA
: Micro 120 mA
Durée de charge caractéristique
Ces indications sont des références qui ne s'appliquent qu'aux
accumulateurs déchargés et intacts !
Taille Capacité
4 x AAA 500
4 x AAA 700
2 x AAA 900
4 x AA 1300
4 x AA 2000
2 x AA 2400
Aperçu des DEL d'état de charge
État de charge
Aucune paire d'accumulateurs
n'a été mise en place,
Déchargement terminé
Chargement
L'accumulateur est chargé,
charge de maintien
L'accumulateur est défectueux
Décharge :
50/60Hz ou tension continue de 12 à
13,8 V
Courant Durée de
de charge charge (env.)
260 mA 162 minutes
260 mA 226 minutes
500 mA 151 minutes
550 mA 199 minutes
550 mA 305 minutes
1050 mA 192 minutes
DEL
ARRET
s'allume en ROUGE
s'allume en VERT
Clignotement ROUGE
Clignotement ROUGE / VERT
23