Gaggia Milano Accademia RI9702/01 Mode D'emploi page 43

34
maintenanCe
4
DESCALING CYCLE
EMPTY DRIP TRAY PLACED
UNDER THE BREW GROUP
Empty the drip tray placed under the
dispensing spout (page 38 - fi g. 2) and
then replace it on the machine .
Then, press the "OK" button.
7
DESCALING CYCLE
STEP 1/2
DESCALING CYCLE...
The descaling cycle is activated .
The bar shows the cycle's progress.
A default amount of water is needed for the rinsing step. This allows performing an ideal rinse cycle to ensure the best conditions to
brew products. The message about fi lling the tank for the rinse cycle is normal, as it is part of the procedure.
10
DESCALING CYCLE
RINSE THE WATER TANK
AND FILL WITH
FRESH WATER
Rinse the water tank and refi ll it with
fresh drinking water.
Then, press the "OK" button.
5
DESCALING CYCLE
FILL THE CARAFE HALFWAY
WITH FRESH WATER AND
INSERT IT IN
BREWING POSITION
Fill half the carafe with fresh water
(page 36 - fi g. 7).
Insert the carafe and place it in the
brewing position. Then, press the "OK"
button .
8 DESCALING CYCLE
STEP 1/2
DESCALING CYCLE...
If the containers need to be emptied,
press the "II" button.
Then, press the ">" button when the
container has been emptied and replaced .
11
DESCALING CYCLE
EMPTY DRIP TRAY PLACED
UNDER THE BREW GROUP
Empty the drip tray placed under the
dispensing spout (page 38 - fi g. 2) and
replace it back onto the machine .
Then, press the "OK" button.
6
DESCALING CYCLE
PLACE A CONTAINER
UNDER HOT WATER &
CARAFE DISP. SPOUTS
Place a container under the dispensing
spout and a container under the hot
water wand.
Then, press the "OK" button.
9 DESCALING CYCLE
RINSE THE WATER TANK
AND FILL WITH
FRESH WATER
At the end of the fi rst step, when the
descaling solution is fi nished, the
machine will require a tank rinse.
12
DESCALING CYCLE
FILL THE MILK CARAFE
WITH FRESH WATER
Completely empty the carafe (page 36 -
fi g. 7) and fi ll it with fresh water.
Insert the carafe in the brewing position,
and then press the "OK" button.