Publicité
Les langues disponibles
Les langues disponibles
6. Buzzer will bips for 30 seconds and the timer indicator
shows "- - " when the setting time finished.
Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1.
Choose and turn the heating zone control knob to activate the
zone that you want to set the timer, the indicator next to the knob
will flash. (e.g. zone 2#)
2. Touch "-' or "+" of the timer control, the minder indicator
will start flashing and "00" will show in the timer display.
3. Set the time by touching the "-" or "+" control.
Hint: Touch the "-" or "+" control once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control, the timer will decrease or increase by 10
minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0
minute.
4. To cancel the timer, turn the heating zone control knob to active the zone, then
touch the "-" of the "Timer" and scroll down to "0", the timer is cancelled, and the
"00" will show in the minute display, and then "--".
5. When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator flash for
5 seconds.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
6. When cooking timer expires, the corresponding
EN-18
Publicité
