SLIDE WIRE
INTO GUN
CONNECTOR
SIDE
REMOVED NOZZLE
REMOVED CONTACT TIP
LAY CABLE AND GUN STRAIGHT
FEED WIRE
APPROXIMATELY 4.00"
FROM THE GUN TUBE END
DEPRESS TRIGGER
TO ACTIVA TE WIRE,
WHICH FEEDS THE WIRE
THRU THE LINER.
TRIM WIRE
STICKOUT
3/8"(9.5mm)
from the Contact Tip
PIVOT ARM ASSEMBL Y
WITH BEARING PRESSING
AGAINST DRIVE ROLL
TENSION ARM ASSEMBL Y
LOCKED IN UP POSITION
DIRECTION
BEARING
WIRE SPOOL
.035" (0.9mm)
INCOMING
GUIDE
DRIVE ROLL
NR-211-MP
OUTGOING GUIDE
ON/OFF
SWITCH
.035"(0.9mm)
WIRE SPOOL
WIRE SPOOL BRAKE
WORK CLAMP AND CABLE
INSTALL .035"(0.9mm) CONTACT TIP
INSTALL BLACK NOZZLE
OF WIRE
.035"(0.9mm)
NR-211-MP
WIRE SPOOL
PLUG IN POWER
INPUT CORD
NR-211-MP
ROTATION