Minitrix 18462 Mode D'emploi page 3

Safety Notes
• Analog 14 volts DC, digital 19 volts AC.
• Do not expose the model to direct sunlight, extreme changes
in temperature, or high humidity.
• The wire used for feeder connections to the track may be a
maximum of 2 meters / 78 inches long.
• WARNING! Sharp edges and points required for operation.
Important Notes
• The operating instructions and the packaging are a compo-
nent part of the product and must therefore be kept as well as
transferred along with the product to others.
• Please see your authorized Trix dealer for repairs or spare
parts.
• The warranty card included with this product specifies the
warranty conditions.
• Disposing: www.maerklin.com/en/imprint.html
• The LEDs in this item correspond to Laser Class 1 according
to Standard EN 60825-1.
• The coupling drawbars included with the models can be used
for a prototypical car spacing.
General Note to Avoid Electromagnetic Interference: A
permanent, flawless wheel-rail contact is required in order to
guarantee operation for which a model is designed. Do not make
any changes to current-conducting parts.
Functions
This car is offered in various versions with different features.
The cars can include the following details:
• Car with a 14-pin digital interface or a built-in
decoder.
See page 19.
• Built-in interior lighting or the option of installing
it (66611). It can be controlled digitally with a
built-in decoder.
• The brightness of the interior lighting can be set by using a
rotary control knob (see page 18).
• Built-in headlights / marker lights.
Can be controlled digitally with the built-in decoder.
• Built-in lighting for train destination sign.
Can be controlled digitally with the built-in decoder.
1
Please note the information about this on the packaging.
1
:
3