Aiwa MIZUSUI AFC-800 Manuel D'instructions page 18

DAILY STORAGE
After daily cleaning, remove the roller brush components and accessories, and place
them in the designated position on the base, following the direction shown in Figure
5-A. The entire machine should be placed in a well-ventilated area, avoiding direct
sunlight or humid conditions. Clean the exterior of the machine with water or a
neutral detergent, making sure to wring out the cloth before use. Avoid letting water
get into the internal components of the floor scrubber, as shown in Figure 5-B. Before
cleaning, ensure the machine has stopped working and is not in charging mode. After
cleaning, keep the machine out of direct sunlight and away from moisture.
Common failures
The machine cannot be
turned on, and the
indicator light does not
light up
The handle indicator
blinks in turn
Work for 1 second to stop,
the ground brush red light
The machine is stopped
during the operation, and
the ground brush lights
up red
The machine does not
stop regularly during self‐
cleaning
The charging light does
not flas
Possible causes
The product is dead or
underpowered
The roller is tangled in hair
Waste water tank removal
The waste water tank is
full
The adapter is not
connected
The charger and the
connectornare not well
connected
Workaround
Please charge the product
before use
Clean the rollers and turn
the system back on
Put the waste water tank
back into the machine
Clean the waste water
tank and put it back on
the machine
Please check and connect
it
Please check and connect
it
ENGLISH