Aiwa MIZUSUI AFC-800 Manuel D'instructions page 15

INTRODUCTION
(FIG 1: A-1) Press the power switch button on the handle or the main unit to activate
the roller brush; press it again to turn off all operations. When the machine is placed
on the base and the adapter is connected, press the self-cleaning button gently to
activate the roller brush self-cleaning function. This process takes 30 seconds, after
which the cleaning will stop automatically, and the machine will continue charging.
(FIG 1: A-2-3) High water flow button on the handle: Tap to turn on the water spray
function as needed for cleaning and tap again to turn off the water spray function.
(FIG 1: H) On the host, tap the voice switch button, tap 'Voice on,' and then tap 'Voice
off' again
ATTACHMENTS
(FIG 2: 4-5-6) Hose assembly: Connect to the main unit and head end connection
accessories. It assists in cleaning high and low areas that are difficult to reach.
(FIG 2: 1) Window brush: Used to clean windows, mirrors, and other areas with the
help of the hose assembly.
(FIG 2: 3) Electric brush: Used to clean stubborn stains. You can control the switch
and spray water using the button at the head of the hose. Long press the water spray
button to spray water.
(FIG 2: 2) Flat suction: Cleans dust from narrow gaps such as between bed seams and
window gaps.
PRODUCT USE
For easy transportation and storage, the base assembly, handle assembly, and body
part are packed separately. When using it for the first time, please open the package,
take out all the parts, assemble them, and start working according to the steps in
Figure 4.
Insert the end of the handle assembly into the corresponding top position of the main
body in the vertical direction shown in Figure 4-A. There is a snap positioning
mechanism inside to ensure it is tight and secure after insertion. The assembly is
complete when you hear a "click," as shown in Figure 4-B.
Assembly of Fresh Water Tank Components
Open the cap of the clean water tank assembly as shown in Figure 4-D, and add clean
water (do not exceed the highest water level marked on the tank, as shown in Figure
4-C). Close the cap tightly. According to Figure 4-E, load the clean water tank into the
corresponding position of the main body. There is a snap positioning mechanism
inside, and the assembly is complete when you hear a "click," as shown in Figure 4-F.
ENGLISH