Publicité
Les langues disponibles
Les langues disponibles
Zone Adjust Operation Procedure K L M
For fine-tuning misalignments on a part of the screen after adjusting the overall screen misalignment using
"Adjust(Pixel)" and "Adjust(Fine)".
The screen can be divided vertically and horizontally into 10 sections for partial adjustments to be made.
0
A Set "Adjust Area" to "Zone"
B Select "Adjust Color" and "Adjust Pattern Color"
C Select Adjust(Fine), and press the [OK] button
The selected adjustment pattern and Zone Adjustment window are displayed.
0
The adjustable range may be smaller depending on the pixels being adjusted on the entire screen.
0
Zone Adjustment Window
.
D Press the [JKH I] keys to move the cursor to the point to be adjusted
E Press the [OK] button to enter the Adjustment mode
F Use the [JKH I] keys to move and adjust the pixels in the vertical and horizontal directions across the entire screen.
The adjustment setting appears at the center of the Zone Adjustment window.
0
Pixel Adjustment Setting
Cursor Position
.
G After adjustment is complete, press the [BACK] button to exit the Adjustment mode
60
Zone Cursor
Pixel Adjust
Zone Adjust
Position
Color A.
ADJUST.
Color P.
COLOR.
COLOR.
GAMMA
TEMP
P. FILE.
Pixel Adjust
Zone Adjust
Position
Color A.
ADJUST.
Color P.
COLOR.
COLOR.
GAMMA
TEMP
P. FILE.
Position
Red
0 / 0
H 0
V 0
Select
Back
A. Area
PIC.
Operate
BACK
ADJ.
H (Horizontal)
Red
0 / 0
H 0
V 0
Select
Back
A. Area
Operate
PIC.
ADJ.
8 / 5
H −31
V 7
Adjustment Pattern
Color for
Adjustment
Remote Control Operation
BACK
Guide
Adjustment Setting
Publicité
