JVC DLA-RS66 Manuel D'instructions page 36

Adjusting 3D Movies
3D video images may appear differently to different
viewers. It may also be affected by your physical
condition at the time of viewing.
You are therefore recommended to adjust the video
images accordingly.
Press the [3D SETTING] button to
1
display "3D Setting"
Adjusting parallax (Parallax)
Adjust the displacement of the image for the left
and right eyes separately to obtain the best 3D
effect.
To do so, use the H I keys to move the cursor.
0
Setting range: -15 to +15
0
Adjusting crosstalk (Crosstalk Cancel)
Double images (overlapping of the left image with
the one on the right or vice versa) can be reduced
to deliver a clear quality.
To do so, use the H I keys to move the cursor.
0
Setting range: -8 to +8
0
* Adjustment cannot be made when "2D to 3D
conversion" is set to "On".
Adjust the depth perception (Intensity)
The depth of the image can be adjusted to deliver
the best 3D effect during 2D-3D image conversion.
To do so, use the H I keys to move the cursor.
0
Setting range: 1 to 5
0
* Adjustment can only be made when "2D to 3D
conversion" is set to "On".
MEMO
Depending on the movies, 3D effect may be less than
0
what you expected.
Adjusting the subtitle display (Sub Title
Adjust)
If distortion occurs in the subtitle during 2D-3D
image conversion, set to "On".
* Adjustment can only be made when "2D to 3D
conversion" is set to "On".
Press the [MENU] button to exit
2
36
.