JVC DLA-RS66 Manuel D'instructions page 49

Picture Adjust
Picture Mode
You can adjust the image quality according to the type of video image you are viewing.
Æ "Setting the Picture Mode" （p. 37）
Color Profile K L M
By setting the "Color Profile" (color space information) according to the "Picture Mode", you can fine-tune the image
quality according to the movie you are viewing.
Æ "Setting the Color Profile K L M" （p. 38）
Color Temp.
For setting the color temperature of the video image.
When "Picture Mode" is set to "THX", the setting is fixed at 6500K.
0
Preset
Setting
Xenon 1 to Xenon 3 K L
* Selectable only when "Picture Mode" is set to
"Film".
5500K to 9500K (9 levels in increments of
500K)
High Bright
* Selectable only when "Picture Mode" is set to
"3D".
Custom 1 to Custom 3
Custom
Setting
Gain Red, Gain Green, Gain Blue
* Adjustable only when Custom 1 to Custom 3 is
selected.
Offset Red, Offset Green, Offset Blue
Color temperature that reproduces the characteristics of a xenon lamp
used in cinemas.
Xenon 1: A light source color that is emitted by a film projector
0
Xenon 2: A light source color emitted by a projector used for digital
0
cinema
Xenon 3: A light source color that looks cooler than that of "Xenon
0
2"
Increasing the value enhances the blue tone of the video image, while
decreasing the value enhances the red tone.
Color temperature that gives priority to brightness.
The color temperature of video images can be adjusted manually and
saved as one of the three customized settings.
Adjusts each color in the bright parts of the video image.
Setting range: -255 (reduces the red/green/blue tone) to 0
0
(enhances the red/green/blue tone)
Adjusts each color in the dark areas of the video image.
Setting range: -50 (reduces the red/green/blue tone) to +50
0
(enhances the red/green/blue tone)
Description
Description
49