Publicité
Les langues disponibles
Les langues disponibles
Tips
Wash new sponge cloths thor-
¡
oughly to remove any salt adher-
ing to them. Salt can cause rust
film to develop on stainless steel
surfaces.
Always remove any residues of
¡
limescale, coffee, milk and clean-
ing/descaling solutions immedi-
ately to prevent corrosion.
14.3 Cleaning the appliance
WARNING
Risk of electric shock!
An ingress of moisture can cause an
electric shock.
▶
Never immerse the appliance or
the power cord in water.
▶
Liquids must not be spilled on the
appliance plug connection.
▶
Do not use steam- or high-pres-
sure cleaners to clean the appli-
ance.
WARNING
Risk of burns!
Some parts of the appliance become
very hot.
▶
Never touch hot appliance parts.
▶
After use, allow hot appliance
parts to cool down before touch-
ing.
Cleaning and servicing en
Clean the housing, the high-gloss
1.
surfaces and the control panel with
a microfibre cloth.
Clean the outlet system with a soft,
2.
damp cloth after beverages have
been dispensed.
Rinse the water tank with fresh,
3.
clean water.
If the appliance has not been used
4.
for a long time, e.g. after a holiday,
clean the entire appliance, includ-
ing moving parts such as the brew-
ing unit or water tank.
Note: The appliance will rinse itself
automatically if you switch it on when
it is cold or switch it off after it has
dispensed coffee. The system is
therefore self-cleaning.
14.4 Cleaning the drip tray
and coffee dregs con-
tainer
Clean and empty the drip tray and
coffee dregs container every day to
prevent deposits.
Pull the drip tray and the coffee
1.
dregs container forwards and out.
Insert the coffee dregs container
‒
in the drip tray and put the drip
plate on top.
25
→ Fig.
Clean and dry all parts.
2.
Insert the coffee dregs container
‒
in the drip tray and put the drip
plate on top.
Insert the drip tray with the cof-
‒
fee dregs container in the appli-
ance.
→ Fig.
26
25
Publicité
