Publicité
Les langues disponibles
Les langues disponibles
SERVICING
Removing grease filters
Carbon filter
Lighting
EN 8
1. Slide the hood out completely.
2. Push in the handle of the filter and remove the grease filter.
Replacing the carbon filter
Use a carbon filter if the cooker hood is not connected to an exhaust duct.
1. Remove the grease filters.
2. Remove the mounting bracket by pulling it out.
3. Attach the carbon filter.
4. Place the mounting bracket in position.
5. Place the grease filters in position.
Important:
• The saturation of the filter depends on the intensity of use, the
manner of cooking and the regularity with which the grease
filters are cleaned.
• The carbon filter must be replaced every four months at a minimum.
• Carbon filters are not washable for reuse. Saturated carbon is not
environmentally-friendly; replace the filter in a timely manner.
This hood is fitted with a light system. This light system has to be
replaced by an authorized technician. Do not attempt to replace it
by yourself.
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
Publicité
