Crivit 300005 Mode D'emploi page 4

Warning! Please note that the pump
plunger and pump cylinder become very
hot over longer periods of pumping due to the
friction between them. For this reason, you
should only grasp the floor pump on the pump
handle after pumping in order to avoid burns.
- Due to the risk of injury, a defective or dam-
aged floor pump may never be used.
Warning! Some bicycle valves do not
allow pressure display. For your own safety,
please check the air pressure with a calibrated
manometer (i.e. at a fuel station).
Initial use of the floor pump:
(B1 / B4)
(B1) Place the floor pump on a level and stable
surface.
(B2) There must be no kinks in the pump hose.
(B3) During pumping, please always position
yourself with both feet on the foot plate of the
floor pump to ensure it won't fall over.
(B4) Operate the pump handle in a smooth and
even manner and not too quickly.
!
(B5) There is a red pointer in the middle of
the manometer. This red pointer can serve as an
optical mark for the desired pressure.
Turn the red pointer to the desired pressure dis-
play for this purpose.
Please note that the set mark only serves as orien-
tation and does not influence the air pressure!
Adapter:
(C1)
The floor pump has been provided with a
pump head with a reversible valve adapter. As
delivered, the pump head has been set to use the
SCHRADER (large opening) adapter. To switch
to using the DUNLOP/PRESTA adapter (smaller
opening), flip the lever (A) upwards horizontally.
Do NOT pull the lever. Unscrew the valve adapter
from the pump head. Turn the valve adapter so
that the larger opening will be screwed into the
pump head (b).
Note: screw the valve adapter slowly onto
the pump head to prevent it from tilting during
screwing.
Adapter: (C1)
(1) E.g. balls
(2) E.g. air mattresses
(3) E.g. inflatable boats
6
(4) To inflate inner tubes with schrader valves
e.g. mountain bikes, trolleys and trailers.
(5) To inflate inner tubes with blitz valves,
e.g. city/trekking bicycles
(6) For inflating inner tubes with a presta valve,
e.g. on racing bicycles and mountain bikes.
(7) Pump head (To lock in place, please fold
down the lever of the pump head.)
(Valves (4), (5), (6) not included)
Inflating tyres with a schrader valve: (C2)
First remove the dust protection cap (1). Insert the
pump head with the large opening into the valve
(2). To lock in place, please fold down the lever of
the pump head (3).
Inflating tyres with a blitz valve: (C3)
First remove the dust protection cap (1). Insert the
pump head with the small opening into the valve
(2). To lock in place, please fold down the lever of
the pump head (3).
Inflating tyres with a presta valve: (C4)
First remove the dust protection cap (1). Detach
the valve nut (2a-2c). Insert the pump head with
the small opening into the valve (3). To lock in
place, please fold down the lever of the pump
head (4).
Inflating air mattresses, inflatable toys,
etc.: (C5)
First open the valve plug (1). Select the appropri-
ate plastic adapter and insert it into the large
opening of the pump head (2). To lock in place,
please fold down the lever of the pump head (3).
Now insert the plastic adapter into the object to
be inflated (4).
Inflating balls: (C6)
Insert the metal adapter in the large opening of
the pump head (1). To lock in place, please fold
down the lever of the pump head (2). Now insert
the metal adapter into the ball (3).
!
Cleaning & care instructions:
- clean with a damp cloth
- do not immerse in water
- regularly inspect the floor pump's screw joints
for secure attachment before use
- the floor pump is maintenance-free.
- Store the floor pump in a cool, dry place pro-
tected from UV light.
Disposal:
Packaging is made of 100 % environmentally-
friendly materials that can be disposed of at
your local recycling point.
Please enquire with your community or municipal
administration regarding possibilities for the dis-
posal of the product.
Warranty:
Warranty of the Monz Handelsgesellschaft Inter-
national MBH & CO. KG.
Dear customer, this device comes with a three-
year warranty, valid from the date of purchase. In
case of defects of this product, you will have legal
rights towards the seller of this product. These
legal rights shall not be limited by our warranty as
set out below.
Warranty terms:
The warranty term starts on the date of purchase.
Please keep the original receipt in a safe place.
This document is required as proof of purchase.
If within a period of three years following the
date of purchase, this product displays material
or manufacturing defects, we shall - at our discre-
tion - repair or replace the product free of charge.
This warranty assumes that within a period of
three years the defective device and the proof of
purchase (receipt) are submitted and that a brief
written description of the defect, including when it
occurred, is provided.
If the defect is covered by our warranty, you shall
receive a repaired or a new product. The repair
or exchange of the product does not commence a
new warranty term.
Distributor:
MONZ Handelsgesellschaft
International mbH & Co. KG
Schöndorfer Str. 60–62
54292 Trier / Germany
Service address:
MONZ SERVICE CENTER
c/o Teknihall Elektronik GmbH
Breitefeld 15, 64839 Münster / Germany
Hotline: 00800 / 68546854 (free of charge,
mobile networks may vary)
E-Mail: monz-gb@teknihall.com
E-Mail: monz-ie@teknihall.com
Dated: 12/2017
Ident-Nr.: PO30000363-26235
7