GB
IE
NI
FLOOR PUMP
Instruction Manual
Introduction ..............................................................5
Intended use .............................................................5
Package contents .....................................................5
Technical data ..........................................................5
Attention safety instructions .....................................5
Initial use of the floor pump ....................................6
Adapter.....................................................................6
Cleaning & care instructions ...................................6
Disposal ....................................................................7
Warranty ..................................................................7
Warranty terms ........................................................7
Distributor .................................................................7
Service address .......................................................7
Introduction:
Congratulations!
With your purchase you have chosen a high-
quality product. Make yourself familiar with the
product before starting to use it. Carefully read the
following instruction manual. Use the product only
as described and only for the specified areas of
application. Keep this instruction manual for future
reference. When transferring this product to third
parties, also include all documents.
Symbols in this instruction &
installation manual:
!
This symbol indicates a risk of injury.
!
This is how additional information is ear-
marked.
!
Intended use:
This floor pump is suitable for inflating all conven-
tional bicycle tyres. Other uses or modifications to
the product are considered non-intended usage
and can lead to risk of injury and damages. The
distributor bears no liability for damages result-
ing from non-intended usage. The product is not
intended for commercial use.
Package contents:
1 x floor pump
1 x metal adapter for balls,
2 x plastic adapters for air mattresses, inflatable
toys, etc.
1 x instruction manual
Technical data:
Type: Floor Pump
IAN 300005
Item-/Monz-No: 26235
Project: PO30000363
Nominal pressure: 7 bar / 100 PSI
Maximum allowable pressure: 8 bar / 116 PSI
Displacement: 370 ml / 370 cm³
Pressure hose length: 100 cm
Production date: 2018
Warranty: 3 years
!
Attention safety instructions!
ATTENTION! RISK OF DEATH AND
INJURY.
Keep packaging material away from children.
There is a risk of suffocation and other injuries!
- You can inflate all bicycle tires up to the floor
pump's indicated maximum allowable pressure
(max. 8 bar / 116 PSI) or to the tyre manufac-
turer's indicated maximum tyre pressure. This
can usually be found on the tyre wall. The indi-
cated maximum values may not be exceeded at
any time.
Warning! Risk of injury through explosion
if maximum permitted pressure values are
exceeded.
- Defective or damaged air pumps may no
longer be used due to risk of injury. Defective
Floor pumps must be properly disposed of.
Repairs are not possible.
- Floor pumps with damaged connection parts
or other defects or damage may no longer be
used due to risk of injury. Defective floor pumps
must be disposed of correctly. Repair is not pos-
sible.
Warning! Damaged floor pump, hose,
adapter or faulty connectors cause risk of
explosion.
- Due to the high operating force and the risks
associated with this, the product is not suited for
use by children or persons with physical and/or
mental disabilities.
(A1 / A2)
5