Publicité
Press
in the bottom centre to customise operation of the device to suit the various scenarios or
operating situations provided by the APP (for example: Back home, Leaving home, Dawn, Goodnight,
Temperature, Humidity, Weather, Air quality, Dawn/dusk) or in combination with other devices.
Press
in the bottom left corner and then in the top of the screen, for example:
customise (update and/or change where permitted) the appliance's position or the outdoor wind
speed, air pressure, humidity and temperature (see right).
Press
top right to customise the following: Change Device name, Device position, Check Network,
Third-party devices supported: Amazon Alexa, Google Assistant, Device sharing, Create a Comment
group, Device Info, Feedback, Update Firmware, Remove device, Reset to factory settings.
The smartphone must be connected to Wi-Fi or cellular data network for remote control.
Voice control
The device is compatible with Amazon Alexa and Google Assistant voice controls. Open the
corresponding App/connect the Skill (make sure that the account and password used are the same
as those of the "Bimar Live Smart" app) and follow the settings.
Google Home
: some basic vocal commands are:
- "OK Google" or "Hey Google", turn on XX (name of the device)
- "OK Google" or "Hey Google", turn off XX (name of the device)
- etc.
Amazon Alexa
: some basic vocal commands are:
- "Alexa", turn on XX (name of the device)
- "Alexa", turn off XX (name of the device)
- etc.
Note: the voice control has defined functions.
First use: run the appliance to eliminate the "new smell" and any oil residue from the manufacturing
process for at least 10/15 minutes: insert the plug inside socket, pos. mode HI and ajust the
thermostat at 30°C. During this operation, ventilate the room well to eliminate the "new smell" that is
given off by the appliance.
Follow these steps to use the appliance correctly:
1)
Before to insert the plug into the power socket, check that the main switch to pos. "0".
2)
Insert the plug into the power socket.
3)
Press the main switch to pos. "I", press the switch "
required functions.
4)
Weekly programming: (only activated via Smartphone): sets: the on/off periods for each day of
the week and the temperature required. Programming may be: timer ON, timer OFF or timer
ON/OFF, in which the on-off periods are set for just once or for every day of the week, mode and
the temperature is selected. Save.
5)
Press the switches to: "
remove the plug from the power socket.
At each use, check that the air intake and dissipation grilles cannot become blocked; furthermore,
to avoid the risk of fire or overheating of the appliance, do not cover it or use it to dry laundry.
Never leave the appliance connected to the socket if it is not in use, especially for long periods.
In the event of a breakdown or malfunction, switch off the appliance and have it checked by
professionally qualified personnel; repairs carried out by unqualified personnel can be dangerous
and void the guarantee
" and main switch to"0" position to turn off the appliance, and
26
" to active the heater and select the
to
Publicité
