Télécharger Imprimer la page

Bimar FH129E Notice D'instructions page 22

Publicité

WARNING: Do Not Ingest Battery. Chemical Burn Hazard.
This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it
can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries
away from children. If the battery compartment does not close securely, stop using the product and
keep it away from children. If you think batteries might have been swallowed or placed inside any
part of the body, seek immediate medical attention. The batteries contain materials, which are
hazardous to the environment; they must be removed from the appliance before it is scrapped and
that they are disposed of safely.
-Smartphone.
In addition to the control via the control panel and the remote control, the convection heater can be
controlled via smartphone.
Description
Wifi Fan heater, usable via Smartphone via application with Android or iOS operating systems.
Adjustable selections via the Bimar Live Smart APP.
The APP installation and configuration procedure may be slightly different from what is described
in this manual; proceed as indicated in the APP.
We are not responsible for problems caused by the internet line, the Wi-Fi router and other smart
devices.
Check that the router is for domestic use, that the WiFi network has no access restrictions other
than the password, and the presence of a strong and uniform WiFi signal in the room where the
appliance is to be installed and used. In general, routers have set up dual-band, i.e. based on dual
frequency (2.4 and 5)GHz.
To activate and configure the device, you only need to set the
fixed frequency at 2.4GHz (access the IP address of the router
and search for the network settings section (image on the side,
refer to it as an example; if in doubt, contact professionally
qualified personnel). For subsequent uses of the device, if
desired, reset the router to dual frequency.
Make sure that the smartphone is connected to the wi-fi network to be used for the appliance.
First Installation/Setup
1.1 Install the "BIMAR life Smart" App via Google Play (Android) or AppStore (iOS), or
scan the QR code provided here.
For Android
1.2 Once installed, the app icon appears.
Click the "Bimar Live Smart" icon to run the app.
1.3 At the first access, register and fill in your credentials:
For iOS
22

Publicité

loading

Ce manuel est également adapté pour:

Hp130