Oase Waterfall Spillway with Filtration 16 in. Notice D'emploi page 4

- English -
Installation
Important:
● When choosing a location for your waterfall spillway, keep in mind the spillway can be mounted to the liner to avoid
water loss. For example, the spillway should be mounted to a liner if it is placed at the beginning of a stream.
Assembling the Spillway with Filtration
1. For maximum water flow, it is recommended that the
largest tubing size for your pump is used.
○ If needed, cut the adapter as shown using a hacksaw;
consult packaging for tubing size.
2. Assemble coupler, gasket, and adapter to spillway.
● Select a level location to place the waterfall spillway.
3. Begin by building a base with the desired waterfall height.
4. Place the spillway onto the base.
NOTE: It is very important that the spillway is level, so be
sure to check that the structure is level from front to back
as well as left to right.
1.
2.
3.
4.
4