Publicité
RX = 432.000 MHz
TX = 437.000 MHz (This is a (+ 5) Offset)
TX CTCSS tone 123.0
a. Change from Menu to Menu by pressing the [EXIT] key.
b. Set radio to VFO Mode by pressing [VFO/MR]
Channel number at the right will disappear.
c. [MENU]
[2][8] [MENU] [1] [0] [MENU] [EXIT]
d. [MENU] [1][3] [MENU] 123.0 [MENU] [EXIT]
e. Enter RX frequency (Ex. 432000)
f. [MENU] [2][7] [MENU] [1][0] [MENU]
-->>[EXIT]
g. Enter TX frequency (Ex. 437000)
h. [MENU] [2][7] [MENU] [1][0] [MENU]
-->> [EXIT]
i. [VFO/MR] Return to MR Mode. Channel number will re-appear.
Ex 2. Programming a Simplex Channel with CTCSS tone
EXAMPLE New memory in Channel 10:
RX = 436.000 MHz
TX CTCSS tone 123.0
a. Change from Menu to Menu by pressing the [EXIT] button.
b. Set radio to VFO Mode by pressing [VFO/MR]
Channel number at the right will disappear.
c. [MENU] [2][8]
[MENU] [1] [0] [MENU] [EXIT]
d. [MENU] [1][3] [MENU] 123.0 [MENU] [EXIT]
-->>Use [A/B] to select Upper display
e. Enter RX frequency (Ex. 436000)
f. [MENU] [2][7] [MENU] [1][0] [MENU]
-->> [EXIT]
g. [VFO/MR] Return to MR Mode. Channel number will re-appear.
Deletes Prior Data in channel (Ex. 10)
Selects desired TX encode tone
Enter the desired channel (Ex 10)
RX has been added
Enter the same channel (Ex 10)
TX has been added
Deletes Prior Data in channel (Ex. 10)
Select desired TX encode tone (Ex 123 CTCSS)
Enter the desired channel (Ex 10)
Channel has been added
19
Publicité
