Publicité
indicating that you need to change your battery or put your radio in the charger.
4.3 Status Indications
The status LED has a very simple and traditional design. When you receive a signal it turns green, when you transmit it turns
red, and it's off in standby.
4.4 Main keypad controls
• [CALL] key: Press it for a short time to turn on the FM radio. Press it again to turn it off.
If you press it for a long time you will activate the alarm function. Press it again to turn off this feature.
• [MON] key: Press it for a short time to light up the flashlight. If you push this button again, the flashlight will light up to
strobe mode. Press MONI a third time to turn off the flashlight.
To activate the Monitor function presses the button for a long time.
• [VFO/MR] key: Press it for switches between Frequency (VFO) Mode and Memory (MR) mode. Memory mode is
sometimes also referred to as Channel mode.
To save frequencies to channel memory you must be in Frequency (VFO) mode.
• [A/B] key: Press it for switches between A (upper) and B (lower) displays. The frequency or channel on the selected display
becomes the active listening and transmit frequency or channel.
To save frequencies to channel memory you must be on the A display.
When listening to broadcast FM, the [A/B] key switches between 65-75 MHz and 76-108 MHz band
• [MENU] key: it is used for activating the MENU, choose each MENU selection and confirm the parameter.
• [▲] key: Press it for more than 2 seconds, the channel and frequency will move upwards rapidly; in SCAN mode, press this
control to move the scanning upwards.
• [▼] key: Keep it pressed it for more than 2 seconds, the channel and frequency will move downwards rapidly; in SCAN
mode, press this control to move the scanning downwards.
• [EXIT] key: push this button to exit the functions and settings.
LED Indicator
Constant Red
Constant Green
Radio Status
Transmitting.
Receiving.
11
Publicité
