Parkside PISG 100 A1 Consignes D'utilisation Et De Sécurité page 7

 Parts description
Carrying strap
1
Control lamp for overheating
2
Rotary knob
3
Earth terminal
4
Electrode holder
5
Combi wire brush with slag hammer
6
Welding mask
7
Handle
8
ON/OFF switch
9
Power cable 2 m
10
Protective glass
11
Welding electrode
12
 Technical Specifi cations
Mains connection:
Max. welding current and the appropriate
standardised operating voltage:
Rated value of the mains voltage:
Greatest rated value of the mains current:
Maximum effective input current:
Rated value of the open circuit voltage:
Protection class:
Weight:
Material thicknesses which can be welded:
 Safety instructions
Please read the operating instructions with care and observe
the notes described. Familiarise yourself with the device, its proper
use and the safety instructions based on these operating instructions.
The rating plate contains all technical data of this welder; please
learn about the technical features of this device.
230 V ~ 50 Hz (alternating current)
10 A/18.4 V – 100 A/22 V
U :230 V
1
I : 18.2 A
1max
I : 6.3 A
1eff
U : 64 V
0
IP21S
approx. 3 kg
1.5 mm – 3.0 mm
7
GB/IE/NI