ULTIMATE SPEED 307584 Instructions De Montage, D'utilisation Et Consignes De Sécurité page 9

3. Always secure the vehicle against rolling away as follows:
- Apply wedges for wheels
- Put the vehicle in gear ("P" on an automatic gearbox)
- Put the hand-brake on
4. The legs of the axle stands must be completely unfolded.
5. Check that the holding bolt is correctly seated (it must protrude from the other side of the middle
pole). Secure the holding bolt against slipping out with the safety pin.
6. Check that the support positions provided by the manufacturer are in prefect working order.
7. Position the axle stands under the vehicle at the points provided (see the vehicle manual).
8. Lower the vehicle slowly and carefully onto the axle stands. The axle stands must be secured and
level.
9. After using the axle stands: When removing the holding bolt, hold onto the middle pole so that this
does not fall down through the middle hole.
§ Maintenance and checking
Before each use, check the axle stands and the welds. Never use damaged axle stands.
There are no spare parts available for this product. In case the product is damaged or broken,
discard the product.
The holding bolt and holding mechanism must be in perfect working order.
m
WARNING! Danger of injury! Never use the axle stands or its parts for any other use except
that described by the manufacturer. The manufacturer accepts no responsibility for incorrect use of
the axle stands!
§ Cleaning and care
For cleaning and care, use only a slightly damp, fluff-free cloth.
§ Disposal
The packaging is made entirely of recyclable materials, which you may dispose of at local recycling
facilities.
Contact your local refuse disposal authority for more details of how to dispose of your worn-out
product.
GB/IE 9