Parkside PDST 20 A1 Instructions D'utilisation Et Consignes De Sécurité page 9

2.1 Specific safety instructions
Changes as a result of technical progress can be introduced by the
manufacturer without prior notice and may not be included in the
operating instructions.
Check the equipment before putting it into service to see that it is
complete, functions properly and is air tight!
Never put a defective or non-functional piece of equipment into
service. Contact the manufacturer or get the equipment checked
by a qualified technician.
Never stand on the equipment!
Hold the hose when unrolling and rolling up so that the hose
cannot injure anyone while swinging about!
Pay attention to the maximum working pressure of the hose. Only
operate the hose within the given parameters (see Technical data).
At very low temperatures the hose may become inflexible and stiff.
This can lead to problems when rolling up!
Take care when the hose is moved it is not damaged by sharp
edges and objects!
Never store or put the hose in a place where there is direct
sunlight!
Never use the hose to carry dangerous liquids (chemicals, acids,
alkaline solutions, etc).
Turn off the air flow before rolling up the hose!
Always work cautiously and with the necessary care!
Never use excessive force!
GB/IE/NI/CY/MT 9