Parkside PGG 15 E4 Traduction Des Instructions D'origine page 32

Working procedures
You can use the mini engraver to create imaginative and unique
engravings . For example, you can permanently mark valuable items .
You can engrave numbers and letters onto metal, glass, wood,
plastic, ceramics, stone and leather . To do this, use the supplied
engraving templates
♦ Hold the appliance at an angle, in the same way you would
hold a pen .
♦ Your arm should be resting on the table .
♦ Move the engraving tip
gentle pressure . To find out the ideal engraving speed, practice
on a spare piece of material .
NOTE
► The supplied engraving tip
therefore not suitable for engraving electronic media such as
CDs, DVDs, etc . These materials and their readability could be
damaged .
Cleaning
WARNING! RISK OF INJURY! Always remove
the plug from the power socket before all main-
tenance and cleaning work on the appliance .
■ Remove all dirt from the appliance . Use a dry cloth to do this .
PGG 15 E4
.
over the workpiece while applying
is made of tungsten steel . It is
GB │ IE │ 29 ■