Publicité
Les langues disponibles
Les langues disponibles
GB
• Other damages excluded from the war-
ranty are motor damages caused by using
the wrong fuel or a wrongly mixed fuel.
• The guarantee is also conditional on
adherence to the instructions on clean-
ing and maintenance.
• Damages caused by material or manu-
facturing defects will be corrected free
of charge by the provision of a replace-
ment or by repair.
This is conditional on the equipment
being returned to the dealer undisman-
tled and with proof of purchase and
guarantee.
Repair Service
• Repairs not covered by the guarantee
can be carried out by our service centre
for a fee. Our service centre will be hap-
py to produce a cost estimate for you.
We can handle only equipment that is
sent in with adequate packaging and
postage payment.
• Caution: Please do not hand in de-
fective appliances with fuel or oil still
in the tanks. Always empty the tanks
beforehand. Material damage (oil/fuel
escaping when the appliance is put on
the side or held upside down!) or fire
damage during transport will be at the
sender's expense.
In case of complaint or service, please
send your equipment cleaned and with
an indication of the fault to our service
address.
Equipment sent freight collect – as
bulky goods, by express or other
special freight – will not be accepted.
• We will dispose of the defective equip-
ment sent to us, free of charge.
110
Technical Specifications
Engine Single-cylinder two-stroke engine
Fuel Mix ............................................. 40:1
Engine capacity ............................. 52 cm³
Max. engine power ........................ 1.5 kW
Engine tick over speed ..............2500 rpm
Max. shaft speed ..................... 11000 rpm
Engine speed at recommended
max. shaft speed .......................7500 rpm
Fuel consumption at
max. engine power .................. 0.534 kg/h
Spec. fuel consumption ...... 0.630 kg/kWh
Tank capacity ................ 700 cm³ / 700 ml
Spark plug.......................Torch L8RTC or
..................................... Champion RCJ6Y
Weight (no cutting tool,
Empty tank) ................................... 7.74 kg
Metal cutting blade
Cutting radius ........................... 255 mm
Threads
Cutting radius ........................... 430 mm
Thread thickness ...................... 2.4 mm
Thread length ..........................2 x 1.5 m
Sound pressure level
(L
) ................... 92.3 dB (A), K
pA
Sound power level (L
Guaranteed ............................114 dB(A)
Measured .... 112.1 dB(A); K
Vibration (a
) ..........6.96 m/s
h
Technical and visual changes may be
made without notice in the course of
development. All dimensions, informa-
tion and specifications in these operat-
ing instructions are therefore subject to
change. Legal claims made on the basis
of the operating instructions can therefore
not be enforced.
= 3 dB
pA
)
WA
= 1.96 dB
WA
, K= 1.5 m/s
2
2
Publicité
