Viking RVRF3361 Guide D'utilisation page 10

Removing the Doors
4. Unscrew the three lower hinge screws and slide the
hinge inwards.
Lower Hinge Removal
To reinstall the refrigerator doors:
Reverse the above steps.
NOTE
Upon replacement, the tube needs to be fully
inserted up the marking line.
Insert tube
up to the
marking
line
Water
Line
NOTE
When reinserting the water tube and replacing the
top hinge cover, be sure that you do not kink the
tube.
Once both doors are in place, ensure they are aligned with
each other and level (Please see the Installation section for
more details), and replace the top hinge cover.
Press
Press
Approximately
5 feet
Removal and Installation of lower
Freezer Drawer
CAUTION
Drawer is heavy. Use caution when lifting
Removing Freezer Drawer:
1. Remove (4) hex head drawer screws.
2. Lift up drawer to remove.
Remove
Hex Head
Drawer Screw
Replacing Freezer Drawer:
1. Lower drawer back into place.
2. Replace (4) hex head drawer screws and tighten.
10
DO NOT
Remove
Other
Screws
DO NOT
Loosen
or
Remove
These 3
Hex
Screws