Web Operations Display - Sony HSR-X200 Mode D'emploi

A message "NETWORK CONTROL" is displayed
on the monitor screen connected to the HSR-X200/
X200P.
The operation that was in progress when logged on
is continued.
Notes
• While the network is connected, operations on the
HSR-X200/X200P panel are disabled.
Operations will be enabled when the network is
disconnected.
• If communication with the PC is not detected for 5
minutes, the network is automatically disconnected.

Web Operations Display

3 CHANNEL selection field
4 Operation buttons
To disconnect the network from the HSR-
X200/X200P
Hold the EXIT/OSD button pressed for more than 2
seconds.
1 Status display area
2 Image view pane
51
(GB)