Locations And Functions Of Parts; Front Panel - Sony HSR-X200 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Locations and Functions of Parts

Front Panel

1 POWER indicator
2 ALARM indicator
3 ALARM FULL indicator
POWER
ALARM
ALARM FULL
FULL
DIGITAL SURVEILLANCE RECORDER HSR-X200
1 POWER indicator
Lights in green when the power is applied to the unit
and goes dark when the power is disconnected.
It flashes in red if any problem occurs with the hard-
disk drive or fan.
Note
In order to keep the unit internal temperature low, a
fan is provided on the side of the unit. If the fan does
not operate properly, the POWER indicator will flash
to indicate a problem. Unplug the unit from the power
supply and check to make sure nothing is obstructing
the fan. If after the power is restored to the unit, the
POWER indicator still flashes, do not use the unit and
consult your dealer.
2 ALARM indicator
Lights in red during pre-alarm recording and flashes in
red during alarm recording. It goes dark when
recording ends.
For alarm recording and pre-alarm recording, see "Alarm
Recording" on page 24(GB).
5 LOCK indicator
4 FULL indicator
-
LOCK
S PAUSE
TIMER
6 Record/Playback buttons
7 MENU button
8 EXIT/OSD button
9 SHUTTLE HOLD button and indicator
0 Shuttle dial
qa Jog dial
SHUTTLE
l ALARM L
HOLD
PRE REVERSE PLAY
MENU
EXIT/OSD
SEARCH
s STOP
G PLAY
ZOOM
FRAME/FIELD
CHANNEL
COPY
REC
a REC
STOP
qh Menu reset button
qg COPY button and indicator
qf SEARCH FRAME/FIELD button
qd CHANNEL button and indicator
qs ZOOM button and indicator
3 ALARM FULL indicator
Flashes in red if the remaining capacity of the alarm
recording area of the built-in hard disk drops below the
specified value (default: 1%).
4 FULL indicator
Flashes in red if the remaining capacity of the normal
recording area of the built-in hard disk drops below the
specified value (default: 1%).
5 LOCK indicator
Lights in red when the security lock function is active.
When you press an operation button with this indicator
lit, the indicator flashes, and a message is displayed to
prompt you to enter a password.
For details on the security lock and password, see "Security
Lock Settings" on page 49(GB).
PUSH
qj PC CARD slot
11
(GB)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hsr-x200p

Table des Matières