SilverCrest HG09047 Instructions D'utilisation Et Consignes De Sécurité page 30

the LED 7 of the connected "secondary" unit stops flashing and a
sequence of beeps will sound.
The "primary" unit LED 7 will still be flashing waiting to pair with
the playback device. Once the "primary unit" has successfully
paired with the playback device both the "primary" and
"secondary" units can be played and controlled synchronously
during Bluetooth
Press the button 9 again to break the TWS pairing connection,
the LED 7 on the connected "secondary" unit flashes and a signal
tone sequence sounds.
NOTE: The product which had its
become the "primary" unit (in the left audio channel), and the other
unit will then by default becone the "secondary" unit (in the right audio
channnel).
˜ PartyPlay function
PartyPlay is a new feature that allows you to connect more than 2
speakers together and up to a total of 10 speakers to play music at the
same time.
NOTE: Only SilverCrest branded Bluetooth speakers with this
PartyPlay function can work together.
NOTE: The product which had its PartyPlay
pressed first will become the "primary" unit and the other unit will then
by default become the "secondary" or "additional" unit. The playback
device can only be controlled with the primary device. To enjoy the
Partyplay function, you can connect more Partyplay compatible
products together and up to 10 speakers can be connected together
by using the Partyplay
Step1: Turn on a loudspeaker which will then by default be set as
the "primary" device and then connected to the playback device via
Bluetooth first. A beep sound will emit out and the LED 7 will flashes
white approx. every 5 sec once connected successfully.
Step2: Press and hold for 2 seconds on the PartyPlay
of the primary device until the signal tone sounds emitted and LED 7
will stay on during PartyPlay pairing.
Step3: Press briefly the PartyPlay
the LED 7 of the second speaker will breathing white and a signal
tone sounds will emit out once connected successfully. You can now
control synchronously during Bluetooth playback mode.
To integrate additional speakers, the Partyplay
be pressed once on the additional speakers. Make sure all the
speakers must all be within Bluetooth range approx.10m.
Press and hold the Partyplay
the Partyplay pairing connection, the LED 7 on the connected
secondary/ additional units flash and a signal tone sequence
sounds.
playback mode.
®
button 10 .
button 9 pressed first will
button 10 of second device,
button 10 again to break
button 10
button 10
button 10 must
GB/IE 31